Doping evolution and polar surface reconstruction of the infinite-layer cuprate Sr1−x_{1-x}Lax_{x}CuO2_{2}

We use angle-resolved photoemission spectroscopy to study the doping evolution of infinite-layer Sr$_{1-x}$La$_{x}$CuO$_{2}$ thin films grown by molecular-beam epitaxy. At low doping, the material exhibits a dispersive lower Hubbard band typical of the superconducting cuprate parent compounds. As carriers are added to the system, a continuous evolution from charge-transfer insulator to superconductor is observed, with the initial lower Hubbard band pinned well below the Fermi level and the development of a coherent low-energy band with electron doping. This two-component spectral function emphasizes the important role that strong local correlations play even at relatively high doping levels. Electron diffraction probes reveal a ${p(2\times2)}$ surface reconstruction of the material at low doping levels. Using a number of simple assumptions, we develop a model of this reconstruction based on the polar nature of the infinite-layer structure. Finally, we provide evidence for a thickness-controlled transition in ultrathin films of SrCuO$_2$ grown on nonpolar SrTiO$_3$, highlighting the diverse structural changes that can occur in polar complex oxide thin films

Nodeless superconductivity arising from strong (pi,pi) antiferromagnetism in the infinite-layer electron-doped cuprate Sr1-xLaxCuO2

The asymmetry between electron and hole doping remains one of the central issues in high-temperature cuprate superconductivity, but our understanding of the electron-doped cuprates has been hampered by apparent discrepancies between the only two known families: Re2-xCexCuO4 and A1-xLaxCuO2. Here we report in situ angle-resolved photoemission spectroscopy measurements of epitaxially-stabilized films of Sr1-xLaxCuO2 synthesized by oxide molecular-beam epitaxy. Our results reveal a strong coupling between electrons and (pi,pi) antiferromagnetism that induces a Fermi surface reconstruction which pushes the nodal states below the Fermi level. This removes the hole pocket near (pi/2,pi/2), realizing nodeless superconductivity without requiring a change in the symmetry of the order parameter and providing a universal understanding of all electron-doped cuprates

Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode

Abstract: This paper presents an experimental investigation of two different magnetorheological ( MR) fluids, namely, water-based and hydrocarbon-based MR fluids in compression mode under various applied currents. Finite element method magnetics was used to predict the magnetic field distribution inside the MR fluids generated by a coil. A test rig was constructed where the MR fluid was sandwiched between two flat surfaces. During the compression, the upper surface was moved towards the lower surface in a vertical direction. Stress-strain relationships were obtained for arrangements of equipment where each type of fluid was involved, using compression test equipment. The apparent compressive stress was found to be increased with the increase in magnetic field strength. In addition, the apparent compressive stress of the water-based MR fluid showed a response to the compressive strain of greater magnitude. However, during the compression process, the hydrocarbon-based MR fluid appeared to show a unique behaviour where an abrupt pressure drop was discovered in a region where the apparent compressive stress would be expected to increase steadily. The conclusion is drawn that the apparent compressive stress of MR fluids is influenced strongly by the nature of the carrier fluid and by the magnitude of the applied current

Using Machine Vision to Estimate Fish Length from Images using Regional Convolutional Neural Networks

An image can encode date, time, location and camera information as metadata and implicitly encodes species information and data on human activity, for example the size distribution of fish removals. Accurate length estimates can be made from images using a fiducial marker; however, their manual extraction is time-consuming and estimates are inaccurate without control over the imaging system. This article presents a methodology which uses machine vision to estimate the total length (TL) of a fusiform fish (European sea bass). Three regional convolutional neural networks (R-CNN) were trained from public images. Images of European sea bass were captured with a fiducial marker with three non-specialist cameras. Images were undistorted using the intrinsic lens properties calculated for the camera in OpenCV; then TL was estimated using machine vision (MV) to detect both marker and subject. MV performance was evaluated for the three R-CNNs under downsampling and rotation of the captured images. Each R-CNN accurately predicted the location of fish in test images (mean intersection over union, 93%) and estimates of TL were accurate, with percent mean bias error (%MBE [95% CIs]) = 2.2% [2.0, 2.4]). Detections were robust to horizontal flipping and downsampling. TL estimates at absolute image rotations >20° became increasingly inaccurate but %MBE [95% CIs] was reduced to −0.1% [−0.2, 0.1] using machine learning to remove outliers and model bias. Machine vision can classify and derive measurements of species from images without specialist equipment. It is anticipated that ecological researchers and managers will make increasing use of MV where image data are collected (e.g. in remote electronic monitoring, virtual observations, wildlife surveys and morphometrics) and MV will be of particular utility where large volumes of image data are gathered

Accurate estimation of fish length in single camera photogrammetry with a fiducial marker

Videogrammetry and photogrammetry are increasingly being used in marine science for unsupervised data collection. The camera systems employed are complex, in contrast to "consumer"digital cameras and smartphones carried by potential citizen scientists. However, using consumer cameras in photogrammetry will introduce unknown length estimation errors through both the image acquisition process and lens distortion. This study presents a methodology to achieve accurate 2-dimensional (2-D) total length (TL) estimates of fish without specialist equipment or proprietary software. Photographs of fish were captured with an action camera using a background fiducial marker, a foreground fiducial marker and a laser marker. The geometric properties of the lens were modelled with OpenCV to correct image distortion. TL estimates were corrected for parallax effects using an algorithm requiring only the initial length estimate and known fish morphometric relationships. Correcting image distortion decreased RMSE by 96% and the percentage mean bias error (%MBE) by 50%. Correcting for parallax effects achieved a %MBE of -0.6%. This study demonstrates that the morphometric measurement of different species can be accurately estimated without the need for complex camera equipment, making it particularly suitable for deployment in citizen science and other volunteer-based data collection endeavours

Electron correlation effects in electron-hole recombination in organic light-emitting diodes

We develop a general theory of electron--hole recombination in organic light emitting diodes that leads to formation of emissive singlet excitons and nonemissive triplet excitons. We briefly review other existing theories and show how our approach is substantively different from these theories. Using an exact time-dependent approach to the interchain/intermolecular charge-transfer within a long-range interacting model we find that, (i) the relative yield of the singlet exciton in polymers is considerably larger than the 25% predicted from statistical considerations, (ii) the singlet exciton yield increases with chain length in oligomers, and, (iii) in small molecules containing nitrogen heteroatoms, the relative yield of the singlet exciton is considerably smaller and may be even close to 25%. The above results are independent of whether or not the bond-charge repulsion, X_perp, is included in the interchain part of the Hamiltonian for the two-chain system. The larger (smaller) yield of the singlet (triplet) exciton in carbon-based long-chain polymers is a consequence of both its ionic (covalent) nature and smaller (larger) binding energy. In nitrogen containing monomers, wavefunctions are closer to the noninteracting limit, and this decreases (increases) the relative yield of the singlet (triplet) exciton. Our results are in qualitative agreement with electroluminescence experiments involving both molecular and polymeric light emitters. The time-dependent approach developed here for describing intermolecular charge-transfer processes is completely general and may be applied to many other such processes.Comment: 19 pages, 11 figure

The performance of magnetorheological fluid in squeeze mode

Abstract: In magnetorheological (MR) fluid, the rheological properties can be changed in a controlled way, the changes being reversible and dependent on the strength of the magnetic field. The fluids have potentially beneficial applications when placed in various geometrical arrangements. The squeeze mode is a geometrical arrangement where two flat parallel solid surfaces, facing each other, are pushed towards each other by an external force operating at right angles to the surfaces. The liquid initially in the gap between them is free to move away from this increasingly small gap, and it does so by flowing parallel to the surfaces, and collecting in a region where it is no longer in the gap between them. The performance of an MR fluid in compression ( squeeze) mode has been studied with the magnetic field being generated by a coil carrying different magnitudes of DC electrical current. A test rig was designed to perform this operation with the flat surfaces being horizontal and being pushed together in a vertical direction and the liquid being forced to move in all directions in a horizontal plane. The rig operated by decreasing the size of the gap at a constant rate. For each trial the current in the coil was kept constant and the instantaneous compressive force was recorded. When plotting compressive stress against compressive strain for each trial, the slope of the curve was found to be larger in general when the current was larger. This was an expected result; however, the behaviour is more complicated than this. For a significant range of values of compressive strain, the slope falls to zero, so that the compressive stress shows no increase during this period while the compressive strain continues to increase. The details of this behaviour are strongly dependent on the initial size of the ga

The Blue Straggler Population in Dwarf Galaxies

In this chapter I review the recent developments regarding the study of Blue Stragglers (BSS) in dwarf galaxies. The loose density environment of dwarf galaxies resembles that of the Galactic Halo, hence it is natural to compare their common BSS properties. At the same time, it is unescapable to compare with the BSS properties in Galactic Globular clusters, which constitute the reference point for BSS studies. Admittedly, the literature on BSS in dwarf galaxies is not plentiful. The limitation is mostly due to the large distance to even the closest dwarf galaxies. Nevertheless, recent studies have allowed a deeper insight on the BSS photometric properties that are worth examining.Comment: Chapter 6, in Ecology of Blue Straggler Stars, H.M.J. Boffin, G. Carraro & G. Beccari (Eds), Astrophysics and Space Science Library, Springe